skip to Main Content

Welcome to ChipSun Technology Co.,Ltd. 

86-755 8345 8798
32.768 KHz Xtal

The Value of an accurate frequency is 32.768 kHz xtal

What does the term xtal mean?

  • A transistor- or logic-gate-based active circuit is required to place an xtal. An oscillator is a device that uses such a circuit. You may purchase an oscillator or make one using discrete components like gates, capacitors, resistors, etc. The inverter and the crystal make up most of it (1MHz).
  • The inverter provides electricity to the circuit and is another necessary active component. They boost the signal while compensating for losses. It is a small quartz crystal fragment capable of mechanical vibration when exposed to alternating voltage. Depending on their thickness, quartz crystals can vibrate at their highest frequency.

What is 32.768 kHz xtal?

A 32.768 kHz crystal unit that has been widely utilized. Ideal for MCU sub-clock and module applications in consumer and industrial devices. For applications needing a wider temperature range, up to +105 C. This makes it ideal for use in clocks and other time-keeping equipment.

Epson is a well-known supplier of kHz-band crystal units in addition to crystal units, offering a variety of oscillators with integrated oscillator circuit ICs and real-time clock modules with integrated real-time clock ICs.

The 32.768 kHz xtal, a highly accurate and dependable frequency control device, can be used for any time-tracking application. Its excellent performance and low power consumption make it ideal for battery-powered devices. The 768KHZoscillator is used because of its incredibly high precision and stability. It is used when precise time is required, just like GPS and atomic clocks. The 32.768KHZ is used because of its incredibly high precision and stability.

What Benefits Are Offered by 32.768 kHz?

The following are some benefits of using this kHz range:

  • The use of frequency control devices with a typical frequency of 32.768 kHz may be seen in various devices with integrated time measures, including microwaves, computers, and cell phones.
  • This frequency stability results from careful temperature management at various temperatures throughout the production process.
  • This 32.768 kHz oscillator overlooks operating voltage variations due to manufacturing “trimming.” Variations in operating voltage have no impact on frequency stability between 1.5 V and 3.63 V.
  • It is equally impressive that such a small amount of current, just a few µA, is consumed. They are much more precise depending on the kind and more user-friendly due to temperature adjustments.

Why is 32.768 kHz so crucial?

  • The standard frequency is 32.768 kHz. The second-hand moves every second, and the quartz clock’s frequency divider can only split a signal 15 times before it becomes a 1Hz second signal. A tuning fork crystal produces this oscillating signal at 768 kHz xtal. It won’t be a signal of 1Hz per second after 15 times of frequency division if you swap it out with a crystal oscillator of a different frequency, and the clock won’t run accurately.
  • 768K=32768=2 Data conversion is more efficient and precise when raised to the 15th power. We use computers, watches, and mobile devices daily, and they all have clocks showing functionality. The 32.768K tuning fork crystal oscillator plays a significant role in our everyday lives and is commonly employed in various circuits that require time.
  • The crystal oscillator usually referred to as the watch crystal, or the tuning fork crystal, has a frequency of 32.768 kHz and is used in real-time clocks. In frequency components, 32.768 kHz is renowned for being extremely common. Its primary duty is to produce the sequential circuit’s reference signal, which has a precision of one-second timing.
  • WTL International Limited supports DIP 2-pin through-hole tuning forks and SMD/SMT tuning fork crystals.

Why is 32.768 kHz used as a crystal frequency so well?

Because it is an efficient frequency for applications involving timekeeping! It seems evident that a crystal frequency that is practical for timekeeping would be popular because timekeeping applications are all about keeping track of time. Our brains seem to react to music strongly in this frequency range. However, our brains are susceptible to music in this Hz range. According to one research, listening to music at this frequency causes the brain’s pleasure and emotional centers to become more active. Compared to music at other frequencies, the music was easier to listen to and more relaxing.

Why are electronics so dependent on the 32.768 kHz xtal?

The importance of 32.768 kHz in electronics Clocks, watches, and computers are just a few examples of electrical equipment that employ the 32.768 kHz xtal. It is significant because it has a stable and precise frequency, which is essential for keeping exact time. It is a low-power, low-frequency oscillator employed to maintain time in several electronic devices. It is a desirable alternative for battery-powered devices due to its low power consumption and inexpensive cost, and timekeeping applications can benefit from its precision and reliability.

The 32.768 kHz xtal is used in the following applications:

  • Frequency producers.
  • They are used with particular receiver types.
  • They function in microprocessors as crystal clocks.
  • Colpitts’ application of the Armstrong Crystal Oscillator in the armed forces and aerospace.
  • Radio and TV transmitters.
  • Crystal oscillators are often used in portable consumer electronics, including smartphones, tablets, digital cameras, and dashboard gadgets like navigation systems. They are widely used for time applications and sub-clock (sleep & timer) functions.
  • The most precise timepieces are quartz watches, which use a crystal oscillator that vibrates at 32,768 cycles per second. For various reasons, your watch might not be as accurate as you think it is.


This crystal is chosen because it is exceedingly precise, stable, and uses very little power. The precision of timekeeping equipment has drastically risen as technology has developed. Additionally, ChipSun offers top-notch active components, electrical components, and supplies. You may purchase this 32.768 kHz xtal at a fair price. Have fun browsing and have a peek at our products. On our website, you get more while paying less. Visit our website to locate high-quality product brands and to make your purchase. Place your order now.

This Post Has 0 Comments


您的电子邮箱地址不会被公开。 必填项已用*标注

Back To Top